Tag Archives: pull-outs

Transit buses and their Highway 305 backups

The in basket: Jenni Booth has a question about Kitsap Transit practices along Highway 305 on Bainbridge Island.

“I see paved bus stop pull-out areas consistently on the island along the highway,” she said. “Unfortunately, I also rarely see them being used.  “Kitsap Transit buses routinely stop in the traffic lane, impeding traffic and creating a hazard as traffic often pulls into the oncoming lane to pass. Many mornings and evenings the delay of cars grows and grows behind the buses as they do this down Highway 305.

“If there are bus pull-outs, why are they not being used as a means to help traffic flow?  I’m sure it has something to do with difficulty merging back into traffic, but this can’t be a viable solution for that. Is it even legal for the bus to impede traffic like this where there are clearly marked pull-outs for the bus?” she asked.

The out basket: This evidently is a long-standing problem. as suggested by a Feb.11, 2004 Road Warrior column addressing it. Otto Spieth hypothesized then, as Jenni does now, that the drivers don’t want to have to fight their way back into the heavy traffic. I said then that it must be scary part of their job.

John Clauson, Kitsap Transit’s service development manager then, said staying in the roadway has more to do with not sinking into a soft shoulder or letting passengers out in an unsafe place.

John now is transit’s executive director and had this to say about Jenni’s complaint.

“Buses, all commercial buses, are allowed to stop on state highways at locations clearly posted as Bus Stop locations.  Stops without signs, commonly called ‘Flag Stops,’ are not allowed on state highways.

“Specific to SR 305, between the Bainbridge Ferry Terminal and Hostmark Road in Poulsbo, there are 20 northbound posted KT Bus Stops (15 with pullouts) and 17 southbound Bus Stops (11 with pullouts). Designated pullouts must meet our criteria for safety.

” KT bus operators should be pulling off the roadway and into the designated pullout, allowing traffic to safely pass the bus while passengers are boarding or alighting. For safety reasons, Kitsap Transit requires operators to pull completely off the roadway with room required available for customers to board and alight.  Operators are not permitted to straddle the fog line.  They must be completely to the right of the fog line (if it is safe) or remain completely in the roadway (to the left of the fog line) with flashers activated.

“As recent as April 2, 2014, a memo was posted reminding operators that they are required to pull buses completely off the SR 305 roadway if it is safe to do so.

“Your observation (in your 2004 article) was absolutely correct. Pulling back into traffic is, indeed, ‘a scary adventure.’  Bus operators cannot just turn on the Yield flasher and immediately pull into traffic.  With the size and bulk, it’s a slower process and most motorists are generally unwilling to slow down and allow a lumbering bus to pull out in front of them. Additionally, they do not want to follow a slow-moving bus and are unaware of the law requiring them to yield to transit buses (RCW 46.61.220).

“Our operations manager will repost the 2014 Memo reminding all operators to use the pullouts on SR 305. Perhaps you can remind your many readers of the law requiring motorists to yield to buses merging back into traffic.  In addition, if your readers do continue to see problems, please have them call us directly to allow us to more efficiently track and investigate the issue.”